制浆废液降低普钙水分的应用研究

针对我国采用高临界流动水分的磷矿进行湿法生产普钙普遍存在产品水分达不到部颁标准的难题,直接采用制浆废液（利用其主要对环境有害成分之一——MNA作减水剂）进行降低普钙水分的研究和应用.实验结果表明,添加少量的减水剂MNA可显著降低国内朝阳、昆阳、浏阳和国外摩洛哥等单种磷矿以及昆阳-朝阳混矿的矿浆粘度和水分.采用国产昆阳-朝阳混矿进行工业生产试验结果表明,添加0.35%～0.4%干矿粉重量的减水剂MNA,不仅可使球磨添加水量从145 kg降至103 kg,矿浆含水量从30.5%降至27%,成品肥含水量从16.24%降至13.77%,而且可使有效磷从10.67%升至12.24%,转化率由86.57%提高到90.45%,矿浆细度由90.18%提高到93.12%.实验和工业生产试验表明,直接用造纸制浆废液降低普钙水分,既确保和改善了普钙的产品质量,又治理了环境污染,取得了较好的经济、环境和社会效益.     

制浆废液降低普钙水分的应用研究

针对我国采用高临界流动水分的磷矿进行湿法生产普钙普遍存在产品水分达不到部颁标准的难题,直接采用制浆废液(利用其主要对环境有害成分之一--MNA作减水剂)进行降低普钙水分的研究和应用.实验结果表明,添加少量的减水剂MNA可显著降低国内朝阳、昆阳、浏阳和国外摩洛哥等单种磷矿以及昆阳-朝阳混矿的矿浆粘度和水分.采用国产昆阳-朝阳混矿进行工业生产试验结果表明,添加0.35%～0.4%干矿粉重量的减水剂MNA,不仅可使球磨添加水量从145 kg降至103 kg,矿浆含水量从30.5%降至27%,成品肥含水量从16.24%降至13.77%,而且可使有效磷从10.67%升至12.24%,转化率由86.57%提高到90.45%,矿浆细度由90.18%提高到93.12%.实验和工业生产试验表明,直接用造纸制浆废液降低普钙水分,既确保和改善了普钙的产品质量,又治理了环境污染,取得了较好的经济、环境和社会效益.     

A new approach for modelling potential effects in cation adsorption onto binary (hydr) oxides

The current approach for modelling ion adsorption onto binary (hydr)oxides using homogeneous surface complexation models involves the assumption of either an ideal mixture of the two surfaces (i.e. two surface sites on one surface) or a patchwise surface (i.e. two surfaces with one surface site on each surface). As the physical truth should be between these two limiting cases, a model which assumes a patchwise surface constituted of three patches is proposed. Two patches represent the distinct (hydr)oxides, and the third one a mixture of these distinct (hydr)oxides. Using the diffuse layer model, the three approaches are applied to literature data for Cd adsorption onto binary mixtures of alumina-coated silica at total constant Cd concentration and varying amounts of alumina coatings. For Cd adsorption onto these binary (hydr)oxide systems, the new approach explains the observed potential effects. The proposed model, which contains two additional adjustable parameters in terms of site concentrations or one adjustable parameter in terms of specific surface area, is more successful than the two limiting cases. The new model is then validated by predicting Ca and Zn behaviour on the same binary (hydr)oxide system.     

Effects of solution conditions on the precipitation of phosphate for recovery. A thermodynamic evaluation

To understand the effects of solution conditions on the precipitation of calcium phosphates from wastewater for recovery, a computer programme PHREEQC was employed to calculate the speciation and saturation-index (SI) with respect to hydroxyapatite of a chemically defined precipitation system, which contains phosphate of 1–200 mg P/l, with Ca/P molar ratios of one to 10 times of the stoichiometric calcium to phosphorus molar ratio of hydroxyapatite, at a pH range of 7.0–11.0. The results show that the SI is respectively the logarithmic function of the phosphate concentration and the calcium concentration, increasing with the increase of either of them; the SI is a polynomial function of the solution pH value and increases with its increase, and the effect of solution pH value is due to its influence on base uptake of the precipitation reaction and the speciation of phosphate and calcium ions; the SI is also a logarithmic function of the solution ionic strength but decreases with its increase; at the temperature range of 5–30 °C the SI increases linearly with solution temperature and the effect of temperature is also due to its influence on the speciation of phosphate and calcium ions.     

Remediation of 2,4-dichlorophenol-contaminated groundwater using nano-sized CaO2 in a two-dimensional scale tank

• Nano CaO₂ is evaluated as a remediation agent for 2,4-DCP contaminated groundwater. • 2,4-DCP degradation mechanism by different Fe²⁺ concentration was proposed. • 2,4-DCP was not degraded in the system for solution pH>10. • The 2,4-DCP degradation area is inconsistent with the nano CaO₂ distribution area. This study evaluates the applicability of nano-sized calcium peroxide (CaO₂) as a source of H₂O₂ to remediate 2,4-dichlorophenol (2,4-DCP) contaminated groundwater via the advanced oxidation process (AOP). First, the effect and mechanism of 2,4-DCP degradation by CaO₂ at different Fe concentrations were studied (Fenton reaction). We found that at high Fe concentrations, 2,4-DCP almost completely degrades via primarily the oxidation of •OH within 5 h. At low Fe concentrations, the degradation rate of 2,4-DCP decreased rapidly. The main mechanism was the combined action of •OH and O₂^•−. Without Fe, the 2,4-DCP degradation reached 13.6% in 213 h, primarily via the heterogeneous reaction on the surface of CaO₂. Besides, 2,4-DCP degradation was significantly affected by solution pH. When the solution pH was>10, the degradation was almost completely inhibited. Thus, we adopted a two-dimensional water tank experiment to study the remediation efficiency CaO₂ on the water sample. We noticed that the degradation took place mainly in regions of pH<10 (i.e., CaO₂ distribution area), both upstream and downstream of the tank. After 28 days of treatment, the average 2,4-DCP degradation level was ≈36.5%. Given the inadequacy of the results, we recommend that groundwater remediation using nano CaO₂: (1) a buffer solution should be added to retard the rapid increase in pH, and (2) the nano CaO₂ should be injected copiously in batches to reduce CaO₂ deposition.     

Effect of biocides on the precipitation of calcium fluoride in the presence of anionic copolymeric inhibitors

The inhibitory efficiency of anionic copolymers and the effect of the biocides sodium hypochlorite, glutaraldehyde, and tris(hydroxymethyl)nitromethane on the precipitation behavior of calcium fluoride (CaF₂) were studied. The efficiency of polymeric inhibitors was traced from conductivity measurements by using half-life (t_1/2) method. X-ray diffraction parameters have been measured for calcium fluoride scale minerals. An anionic copolymer (K-798) acts as one of the best inhibitors for the precipitation process of the calcium fluoride in water as compared to K-775. It is assigned to the fact that the copolymer (K-798) contains both sulfonic acid and sulfonated styrene groups while the polymer (K-775) having only the sulfonic acid group. It was further observed that the biocides have no appreciable effect on the performance of the anionic polymeric inhibitors.     

Enhanced nitrogen removal upon the addition of volatile fatty acids from activated sludge by combining calcium peroxide and low-thermal pretreatments

This study investigated a combined low-thermal and CaO₂ pretreatment to enhance the volatile fatty acid (VFA) production from waste activated sludge (WAS). The fermentative product was added to a sequencing batch reactor (SBR) as an external carbon source to enhance nitrogen removal. The results showed that the combined pretreatment improved WAS solubilization, releasing more biodegradable substrates, such as proteins and polysaccharides, from TB-EPS to LB-EPS and S-EPS. The maximum VFA production of 3529 ± 188 mg COD/L was obtained in the combined pretreatment (0.2 g CaO₂/g VS + 70 °C for 60 min), which was 2.1 and 1.4-fold of that obtained from the sole low-thermal pretreatment and the control test, respectively. Consequently, when the fermentative liquid was added as an external denitrification carbon source, the effluent total nitrogen decreased to Class A of the discharge standard for pollutants in rural wastewater treatment plants in most areas of China.     

湿法烟气脱硫环境下亚硫酸钙强制催化氧化的研究

采用机械搅拌槽式反应器,对湿法烟气脱硫环境进行模拟以研究锰催化对亚硫酸钙氧化的影响。实验得出:湿法烟气脱硫环境下,当槽内亚硫酸钙浆液浓度很小时,锰离子催化氧化对SIV浓度是1.5级,对Mn2+浓度是0.5 级;随着亚硫酸钙浆液增加至某一浓度后,氧化反应开始遵循并行反应机理,即氧化反应包括SIV离子的非催化氧化反应和SIV离子的锰离子催化氧化反应,且锰离子的催化氧化反应对Mn2+浓度是0.5级。文中提出的氧化反应速率的试验公式可以用来对湿法烟气脱硫中的氧化过程进行模拟。     

不除氧单扫描示波极谱法测定茶叶中钙

研究了在不除氧条件下，用单扫描示波极谱法测定茶叶中钙，在０．０２ｍｏｌ／Ｌ ＫＯＨ体系中，钙－桑色素络合物于－０．７８Ｖ产生一灵敏的极谱峰，峰电流与钙浓度在０．１￣０．８μｇ／ｍＬ之间有良好的线性关系。方法灵敏、准确、简便、选择性好。     

氯化钙对聚合氯化铝混凝去除腐植酸的影响作用研究

研究了ＣａＣｌ２对ＰＡＣ混凝去除腐植酸的影响作用，发现ＣａＣｌ２可以改善混凝效果和沉淀性能。探讨了ｐＨ值、投加量、温度等因素的影响，对药剂费用进行了经济分析，为今后的实际应用提供了基本数据。